Doulton RIO 2000+Sterasyl

Doulton RIO 2000 High Flow Ceramic Water Filter System

The RIO 2000 is a multi candle ceramic filter module for use where the finest water quality is required.

Because of its 0.9-micron absolute rating, it is also suitable for private water supplies where the source is micro-biologically contaminated.

The Doulton RIO 2000 is a 6 element ceramic filter module that installs inside a 10" x 2.5" Jumbo / Big Blue type water filter housing and is a great alternative to UV water treatment systems since it does not require electricity.

The Sterasyl ceramic filters are impregnated with silver to prevent bacterial growth. Filters can be cleaned with a brush or Scotch Brite pad when dirty to restore flow.

The system comes complete with 10" x 4.5" Housing, Candle Module / Plenum, 6 Ceramic Candles, and Housing Spanner 

Doulton RIO 2000 Ceramic Water Filter System

The RIO 2000 is the most efficient cyst removal system available and has been tested & proven.

With a flow rate in excess of 33 liters per minute, the RIO 2000 is suitable for high flow applications and is designed around a small footprint to allow parallel installations for even higher volumes.

There is a typical water pressure drop of around 2.5 BAR due to the nature of the ceramic filters and therefore more than one RIO 2000 may be needed and plumbed in parallel if your application requires higher water flow.

For full technical specifications please see the downloadable datasheet on the attachments tab.

Dimensions
13" in height
7.25" in diameter

Please note: This unit is only designed to remove pathogens.
Due to the microporous structure of the ceramic filters, we would always recommend installing a pre-filtration unit with a 5 - 10 micron carbon or sediment filter installed before the RIO.

Doing so will increase the longevity of the ceramic candles and prevent them from clogging at an advanced rate.