Cleaning & maintenance

**Instructions for Cleaning Your Ceramic Water Filter**

To ensure the longevity and optimal performance of your ceramic water filter, follow these simple steps to open the housing and clean the filter element:

1. **Shut Off Water Supply:** Locate the main valve that controls the water supply to your filtration system and turn it off. This is an important safety step to prevent water from flowing while you are working on the filter.

2. **Release Pressure:** Open the tap connected to your water filter system. This step is crucial to release any built-up pressure inside the filter housing, making it safer and easier to open.

3. **Unscrew Housing:** Carefully unscrew the housing that contains the ceramic filter element. Depending on your model, this might require a specific tool or can be done by hand. Remember to do this gently to avoid any damage to the housing or the filter.

4. **Remove Filter Element for Cleaning:** Once the housing is open, gently remove the ceramic filter element. Be cautious as the filter may be wet and slippery.

**Cleaning Tips:**
- Rinse the ceramic filter under running water to remove surface impurities.
- For more thorough cleaning, use a soft brush or a non-abrasive scrubbing pad.
- Avoid using soap or detergents as they can leave a residue.

5. **Reassemble After Cleaning:** After cleaning, place the ceramic filter back into the housing and screw it closed securely. Make sure the housing is tightly sealed to prevent leaks.

6. **Turn Water Supply Back On:** Once everything is reassembled, turn the water supply back on and check for any leaks.

7. **Run Water to Check:** Allow the water to run for a few minutes to clear any air trapped in the system and to ensure that the filter is functioning correctly.

By following these steps, you can effectively clean and maintain your ceramic water filter, ensuring clean and safe drinking water for your home.